Setting up Your DVR for Remote
Connectivity
15
The system features the following PC / Mac remote connectivity options for connecting
over a LAN or the Internet:
• A PC Client Software to access a single system.
• Built-in browser-based software for Internet Explorer
®
(PC) or Safari
®
(Mac).
• CMS-D3, a multi-site CMS application for PC and Mac (for details, see 17 CMS-D3
CENTRAL MANAGEMENT SOFTWARE, page 98).
For details on navigating the remote viewing interface, see 16 Remote Viewing Interface, page 76.
15.1 System Requirements
Prior to using FLIR Client 1, make sure your system meets or exceeds the following system
requirements:
Description Requirement
CPU Pentium® 4 or above
Operating System Windows XP/Vista/7/8
Mac OSX 10.6.6 and above (Intel processors
only)
1
Memory 256 MB RAM or greater
Video 16 MB of video memory
Network (LAN) 10/100 BaseT Network
Network (WAN) 384 Kbps upstream
Browser Internet Explorer 7 or later (PC) / Safari 6.0 and
above** (Mac)
1. For the latest compatibility list, check www.flirsecurity.com/pro, as new software versions are released to the
market.
Note
If a user connects to the system remotely, there may be slow performance when accessing the system lo-
cally. This is normal, and not a malfunction.
#LX400005; r. 1.0/13714/13883; en-US
68
To Next Page
Loading...
Need help?
General
