FLIR D3300 Series - Adding DVRs

CMS-D3 CENTRAL MANAGEMENT SOFTWARE
17
Note
You may receive installation warnings. This is normal. Accept the security warnings to continue.
1. Follow the on-screen instructions to install the software.
2. Click Finish to launch CMS-D3.
3. Click Login to login to the software. By default, a password is not required to log into
CMS-D3.
Note
To open CMS-D3 from the desktop, double-click the CMS-D3 icon (
).
17.3 Adding DVRs
17.3.1 Adding a DVR from the local area network (LAN)
Once you open CMS-D3, you can add a DVR.
Prerequisites:
• DVR must have access to the local area network (LAN).
#LX400005; r. 1.0/13714/13883; en-US
99