FLIR D3300 Series - Selecting PTZ Presets; Deleting PTZ Presets; Starting Stopping PTZ Cruise

Connecting a PTZ Camera
23
1
2
3
4
5
7
6
PTZ Preset Controls
1. Total number of presets
2. Preset number
3. Time shown before changing
4. Go to preset
5. Set preset
6. Save presets
7. Clear preset
23.3.2 Selecting PTZ Presets
1. In the No. field, select the number of the preset you would like to select.
2. Click Go to to go to the preset.
23.3.3 Deleting PTZ Presets
1. In the No. field, select the number of the preset you would like to delete.
2. Click Clear to delete the preset and click Save to save your changes.
23.3.4 Starting / Stopping PTZ Cruise
When PTZ cruise is enabled, the camera will cycle through saved presets. You must set
and save presets to use PTZ cruise.
To start / stop PTZ cruise:
1. Right-click to open the Menu Bar and click the Start Cruise button (
). Enter the sys-
tem password. The camera will cycle through PTZ presets.
• To stop the PTZ cruise, right-click to open the Menu Bar and click the Stop Cruise
button (
). Enter the system password.
#LX400005; r. 1.0/13714/13883; en-US
167