Courier Text Col Row Default Setting Available Options
Description
Ctrl Command 13 13 41 SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 14 13 44 Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 14 13 45 SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 15 13 48 Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 15 13 49 SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 16 13 4C Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 16 13 4D SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 17 13 50 Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 17 13 51 SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 18 13 54 Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 18 13 55 SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 19 13 58 Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 19 13 59 SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 20 13 5C Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 20 13 5D SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 21 13 60 Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Ctrl Command 21 13 61 SET/RESET
0 = On/Off, 1 = Set/Reset, 2 = In/Out,
3 = Enabled/Disabled
This setting allows you to select the text to be displayed on the hotkey menu.
Control Input 22 13 64 Latched 0 = Latched or 1 = Pulsed
This setting configures the control input as either ‘latched’ or ‘pulsed’.
Chapter 6 - Monitoring and Control MiCOM P747
184 P747-TM-EN-1
To Next Page
Loading...
