D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 3 - System Setup 3-35
PRELIMINARY
NOTE: When connecting the printer’s network cable, ensure that it is connected to the network port at the rear
of the Vivid™ S60N/Vivid™ S70N system as shown in Figure 3-28.
Installation of the HP Laserjet M451 Color Printer requires configuring the IP addresses for both the
Vivid™ S60N/Vivid™ S70Nsystem and for the printer. Follow the instructions described below:
- "Peer-to-Peer" using a cross communication cable between the system and the printer.
See Defining the Printer IP Address on page 3 - 36.
THE HP LASERJET M451 COLOR PRINTER MUST BE CONNECTED DIRECTLY TO A
MAINS AC POWER OUTLET
Figure 3-28 Network Cable Connected to Network Port
Do not connect the M451
printer via the USB port
To Next Page
Loading...
