D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-67
PRELIMINARY
b.) After releasing the cir-clips, tap out each securing shaft with a hammer and punch.
See Figure 8-82 below..
c.) Disconnect the Ground cable from the lower arm cover and remove the lower arm cover from
the system - Figure 8-83 below.
Figure 8-82 Tapping Out the Securing Pin
Figure 8-83 Lower Arm Cover Removed from System
To Next Page
Loading...
