D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
8-178 Section 8-6 - Mechanical Platform Components - Replacement Procedures
PRELIMINARY
Status messages are now displayed, in this order:
Initializing
Setting up the System SW
Configuring the system
When Windows configuration is complete, the Set Serial Number dialog box opens:
7.
Open the drop-down menu and select the correct
system type in accordance with the product label:
Vivid™ S60N or Vivid™ S70N
IMPORTANT:
Selecting the wrong system type will result in the
Option Key failing to operate!
8.
Type the system Serial Number as it appears on the
product label attached to the rear of the scanner.
Note:
Use either the on-screen virtual keyboard or the
Alphanumeric keyboard (as preferred) to enter the
number in the dialog box.
Table 8-4 Windows Operating System and Vivid™ S60/Vivid™ S70 Software Installation Procedures
Step Instruction Expected Result
To Next Page
Loading...
