Hioki 3166 - Page 230

208
────────────────────────────────────────────────────
11.4 Command Reference
────────────────────────────────────────────────────
■ Integration stop time setting
Synta
x
INTEgrate:STOP:TIME data1,data2,data3,data4,data5
dat
a
data1 Year 1980 to 2079 (numerical data in NR1 format)
data2 Month 1 to 12 (numerical data in NR1 format)
data3 Day 1 to 31 (numerical data in NR1 format)
data4 Hours 0 to 23 (numerical data in NR1 format)
data5 Minutes 0 to 59 (numerical data in NR1 format)
Functio
n
Sets the Integration stop time.
Erro
r
・An execution error occurs if a nonexistent date is set.
・An execution error results if a time that has already passed is set.
・In the following circumstances, a device dependent error is generated:
If an attempt was made to execute this command while waiting for or
during integrated measurement.
In the event of a system error.
Exampl
e
Transmission
":INTE:STOP:TIME 1997,1,9,20,45"
Sets the Integrated measurement stop time to 20:45 on January 9, 1997.
■ Integration stop time query
Synta
x
INTEgrate:STOP:TIME?
Functio
n
The integrated measurement stop time is returned in (data1) through
(data5). (All as NR1 numeric data.)
Respons
e
synta
x
If headers are ON
If headers are OFF
":INTEGRATE:STOP:TIME data1,data2,data3,data4,data5
"
"data1,data2,data3,data4,data5"
Exampl
e
If headers are ON
If headers are OFF
Transmission
Response
":INTE:STOP:TIME?"
":INTEGRATE:STOP:TIME
1997,1,9,20,45"
":INTE:STOP:TIME?"
"1997,1,9,20,45"
I
NTEgrate:STOP:TIME
I
NTEgrate:STOP:TIME?