Hioki 3166 - Page 309

287
────────────────────────────────────────────────────
16.3 Integrated Measurement Mode and Demand Measurement Mode
────────────────────────────────────────────────────
1
5
1
6
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
A
Printing in progress
Indicates that power was lost
during this interval
Power Loss While Printing is In Progress
In this case, the measurement data for the duration of the power loss is
processed as if it were "0", and integrated measurement continues for the
remaining time that was allotted.
3. Printer operation
a. If power was lost while the printer was printing
The printing operation stops immediately. (Unless the printer is running off
of batteries.) After power is restored, the printer prints an indication that
power had been lost.
b. If power was lost while integrated measurement or demand measurement
was in progress
After power is restored, When the "RS-232C Device" is set to "Printer" and a
printer is connected, the printer prints a message indicating that a power
loss occurred.