HP 830 Series - Configuring an SNMP View; Creating an SNMP View

102
Item Descri
p
tion
SNMP Version Set the SNMP version run by the system.
Configuring an SNMP view
Creating an SNMP view
1. Select Device > SNMP from the navigation tree.
2. Click the View tab.
The View page appears.
Figure 90 View page
3. Click Add.
The Add View window appears.
Figure 91 Creating an SNMP view (1)
4. Enter the view name.
5. Click Apply.
The page in Figure 92 appears.