Level
Severity level of the system log. The information is classified into eight levels
depending on severity:
• Emergency—The system is unusable.
• Alert—Action must be taken immediately.
• Critical—Critical condition.
• Error—Error condition.
• Warning—Warning condition.
• Notification—Normal but significant condition.
• Information—Informational message.
• Debugging—Debug-level message.
Digest Brief description of the system log.
Description
Content of the system log.
Setting the log host
1. Select Device > Syslog from the navigation tree.
2. Click the Loghost tab.
The log host configuration page appears.
Figure 35 Setting the log host
3. Configure the log host as described in Table 11.