HP 830 Series User Manual

287
Configuring service management
1. Select Network > Service from the navigation tree to enter the service management configuration
page, as shown in Figure 276.
Figure 276 Service management
2. Enable or disable various services on the page. Table 96 describes the detailed configuration
items.
3. Click Apply.
Table 96 Configuration items
Item Descri
p
tion
FTP
Enable FTP
service
Enable or disable the FTP service.
The FTP service is disabled by default.
ACL
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service
Enable or disable the Telnet service.
The Telnet service is disabled by default.
SSH
Enable SSH
service
Enable or disable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Enable or disable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP
Enable HTTP
service
Enable or disable the HTTP service.
The HTTP service is enabled by default.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English