HP 830 Series User Manual

105
Figure 95 Creating an SNMP community
4. Configure the SNMP community as described in Table 35.
5. Click Apply.
Table 35 Configuration items
Item Descri
p
tion
Community Name Set the SNMP community name.
Access Right
Configure the access rights:
• Read only—The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent.
• Read and write—The NMS can perform both read and write operations to the
MIB objects when it uses this community name to access the agent.
View
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the access to the
agent from the NMS with the specified source IP address.
Configuring an SNMP group
1. Select Device > SNMP from the navigation tree.
2. Click the Group tab.
The Group page appears.
Figure 96 SNMP group
3. Click Add.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English