HP 830 Series - Configuring Basic Port Security Control

336
Table 104 Configuration items
Item Descri
p
tion
Enable Port Security
Select the box to enable the port security feature globally.
Disabled by default.
Advanced
Configure the following advanced port security settings:
• Temporarily Disabling Port Time—Set the time length for the port to be
disabled upon receiving illegal frames.
• Traps Switch—Select one or more events to trigger trap sending.
Configuring basic port security control
1. From the navigation tree, select Authentication > Port Security.
The Security Ports And Secure MAC Address List area in Figure 333 displays the p
ort security
control settings.
Figure 333 Security Ports And Secure MAC Address List area
2. Click Add.
Figure 334 Configuring basic port security control
3. Configure basic port security control settings as described in Table 105.
4. Click Apply.
Table 105 Configuration items
Item Descri
p
tion
Port
Select a port where you want to configure port security.
By default, port security is disabled on all ports and access to the ports is not
restricted.