Displaying RMON history sampling
information
After you create a history control entry on an interface, the system
calculates the information of the interface periodically and saves the
information to the etherHistoryEntry table. You can perform this task to
view the entries in this table. When you configure the history group, the
system specifies the number of history sampling records that can be
displayed and the history sampling interval.
Displaying RMON event logs
If you configure the system to log an event after the event is triggered
when you configure the event group, the event is recorded in the RMON
log. Perform this task to display the details of the log table.
Configuring a statistics entry
1. Select Device > RMON from the navigation tree.
The Statistics page appears.
Figure 68 Statistics page
2. Click Add.
The page for adding a statistics entry appears.
Figure 69 Adding a statistics entry
3. Configure a statistic entry as described in Table 24.
4. Click Apply.
To Next Page
Loading...
Need help?
General