Level
Select an authorization level for the local user: Visitor, Monitor, Configure, or
Management, in ascending order of priority. A local user has the rights of the specified
level and all levels lower than any specified level.
• Visitor—A user can perform ping and trace route operations but cannot read any
data from the device or configure the device.
• Monitor—A user can read data from the device but cannot configure the device.
• Configure—A user can read data from the device and configure the device but
cannot upgrade the device software, add, delete, or modify users, or backup or
restore configuration files.
• Management—A user can perform all operations except for security log file reading
and management.
IMPORTANT:
This option is effective only for FTP, Telnet, and SSH users.
VLAN
Specify the VLAN to be authorized to the local user after the user passes authentication.
This option is effective only for LAN users.
ACL
Specify the ACL to be used by the access device to restrict the access of the local user
after the user passes authentication.
This option is effective only for PPP and LAN users.
User-profile
Specify the user profile for the local user.
This option is effective only for PPP and LAN users.
Configuring a user group
1. Select Authentication > Users from the navigation tree.
2. Click the User Group tab to display the existing user groups.
Figure 434 User group list
3. Click Add.
The page for configuring a user group appears.
To Next Page
Loading...
Need help?
General