HP 830 Series User Manual

240
Ste
p
Remarks
3. Configuring IGMP
snooping port
functions
Optional.
Configure the maximum number of multicast groups allowed and the fast-leave
function for ports in the specified VLAN.
IMPORTANT:
• Multicast routing or IGMP snooping must be enabled globally before IGMP
snooping can be enabled on a port.
• IGMP snooping configured on a port takes effect only after IGMP snooping is
enabled in the VLAN or IGMP is enabled in the VLAN interface.
4. Displaying IGMP
snooping multicast
table entries
Optional.
Enabling IGMP snooping globally
1. Select Network > IGMP snooping from the navigation tree.
2. Click Enable for IGMP snooping.
3. Click Apply.
Figure 219 Basic IGMP snooping configurations
Configuring IGMP snooping in a VLAN
1. Select Network > IGMP snooping from the navigation tree.
2. Click the icon corresponding to the VLAN.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English