HP 830 Series User Manual

358
• To implement extended portal functions, install and configure IMC EAD, and make sure the ACLs
configured on the access device correspond to those specified for the resources in the quarantined
area and for the restricted resources on the security policy server. On the access device, the security
policy server address is the same as the authentication server address. For more information about
security policy server configuration on the access device, see "Configuring RADIUS."
Configuration task list
Configuration procedure for Layer 2 portal authentication
Ste
p
Remarks
1. Configuring the Layer 2
portal service
Required.
Configure a local portal server, apply the portal server to a Layer 2
interface, and configure the Layer 2 portal authentication parameters.
By default, no local portal server is configured.
IMPORTANT:
To ensure normal operation of portal authentication on a Layer 2 interface, do
not configure port security or guest VLAN of 802.1X on the interface.
2. Configuring advanced
parameters for portal
authentication
Optional.
Configure web proxy server ports, an auto redirection URL, the time that the
device must wait before redirecting an authenticated user to the auto
redirection URL, and the portal user moving function.
3. Configuring a portal-free
rule
Optional.
Configure a portal-free rule, specifying the source and destination
information for packet filtering
A portal-free rule allows specified users to access specified external
websites without portal authentication. Packets matching a portal-free rule
do not trigger portal authentication and the users can directly access the
specified external websites.
By default, no portal-free policy is configured.
Configuration procedure for Layer 3 portal authentication
Ste
p
Remarks
1. Configuring the Layer 3
portal service
Required.
Configure a portal server, apply the portal server to a Layer 3 interface, and
configure the portal authentication parameters.
By default, no portal server is configured.
2. Configuring advanced
parameters for portal
authentication
Optional.
Configure an auto redirection URL, the time that the device must wait before
redirecting an authenticated user to the auto redirection URL, and the portal
user moving function.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English