uration will be lost after
device reboot.
To reboot a device:
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Reboot tab.
The device reboot configuration page appears.
Figure 25 Device reboot configuration page
3. Clear the box to the left of Check whether the current configuration is saved in the next startup
configuration file or keep it selected.
4. Click Reboot.
A confirmation dialog box appears.
5. Click OK.
{ If you select the box to the left of Check whether the current configuration is saved in the next
startup configuration file, the system will check the configuration before rebooting the device. If
the check succeeds, the system reboots the device. If the check fails, a dialog box appears,
telling you that the current configuration and the saved configuration are inconsistent, and the
device is not rebooted. You must save the current configuration manually before you can reboot
the device.
{ If you do not select the box next to Check whether the current configuration is saved in the next
startup configuration file, the system reboots the device automatically.
6. Log in again in to the Web interface after the device reboots.
To Next Page
Loading...
Need help?
General