HP 830 Series User Manual

188
3. In the Set LACP enabled port(s) parameters area, set the port priority, and select the ports in the
chassis front panel.
4. Click Apply in the area.
Table 63 Configuration items
Item Descri
p
tion
Port Priority Set a port LACP priority.
Select port(s) to
apply Port Priority
Select the ports where the port LACP priority you set will apply on the chassis front panel.
You can set LACP priority not only on LACP-enabled ports but also on LACP-disabled ports.
System Priority Set a system LACP priority.
5. In the Set global LACP parameters area, set the system priority.
6. Click Apply in the area.
Displaying information about LACP-enabled ports
1. Select Network > LACP from the navigation tree.
The Summary tab is displayed by default. The upper part of the page displays a list of all
LACP-enabled ports on the device and information about them. Table 64 describes the fields.
2. Select a port on the port list.
3. Click View Details.
Detailed information about the peer port appears on the lower part of the page. Table 65
describes the
fields.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English