HP 830 Series User Manual

447
Configuring authorized IP
The authorized IP function associates the HTTP or Telnet service with an ACL to filter the requests of clients.
Only the clients that pass the ACL filtering can access the device.
Configuration procedure
1. Select Security > Authorized IP from the navigation tree.
2. Click the Setup tab to enter the authorized IP configuration page.
Figure 463 Authorized IP configuration page
3. Configure authorized IP as described in Table 133.
4. Click Apply.
Table 133 Configuration items
Item Descri
p
tion
Telnet
IPv4 ACL
Associate the Telnet service with an IPv4 ACL.
To configure the IPv4 ACL to be selected, select QoS > ACL IPv4.
IPv6 ACL
Associate the Telnet service with an IPv6 ACL.
To configure the IPv6 ACL to be selected, select QoS > ACL IPv6.
Web
(HTTP)
IPv4 ACL
Associate the HTTP service with an IPv4 ACL.
To configure the IPv4 ACL to be selected, select QoS > ACL IPv4.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English