HP 830 Series User Manual

394
Configuring authorization methods for the ISP
domain
1. Select Authentication > AAA from the navigation tree.
2. Click the Authorization tab.
Figure 408 Authorization method configuration page
3. Select an ISP domain and specify authorization methods for the ISP domain, as described in Table
117.
4. Click Apply.
Table 117 Configuration items
Item Descri
p
tion
Select an ISP domain Select the ISP domain for which you want to specify authentication methods.
Default AuthZ
Name
Secondary Method
Configure the default authorization method and secondary authorization method for
all types of users by using one of the following options:
• HWTACACS—HWTACACS authorization. You must specify the HWTACACS
scheme to be used.
• Local—Local authorization (default setting).
• None—This method trusts all users and assigns default rights to them.
• RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the default authorization setting, which is local
authorization.
LAN-access AuthZ
Name
Secondary Method
Configure the authorization method and secondary authorization method for LAN
access users by using one of the following options:
• Local—Local authorization.
• None—This method trusts all users and assigns default rights to them.
• RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthZ area for LAN access
users.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English