419
Figure 433 Local user configuration page
3. Configure the local user as described in Table 124.
4. Click Apply.
Table 124 Configuration items
Item Descri
Username Specify a name for the local user.
Password
Confirm
Specify and confirm the password of the local user.
The settings of these two fields must be the same.
Spaces at the beginning of the password string will be ignored.
Password Encryption
Select the attribute for the password encryption method:
• Reversible
• Irreversible
Group
Select a user group for the local user.
For information about user group configuration, see "Configuring a user group."
Service-type
Select the service types for the local user to use, including Web, FTP, Telnet, PPP, Portal,
LAN access (accessing through the Ethernet, such as 802.1X users), and SSH.
If you do not specify any service type for a local user who uses local authentication, the
user cannot pass authentication and cannot log in.
The service type of the guest administrator and security log administrator is Web.
Expire-time
Specify an expiration time for the local user, in the HH:MM:SS-YYYY/MM/DD format.
When the access device authenticates a local user with the expiration time argument
configured, the access device checks whether the expiration time has elapsed. If it has
not elapsed, the device permits the user to log in.
To Next Page
Loading...
