HP 830 Series User Manual

7
Function menu Descri
p
tion
User level
IPv6
Routing
Summary Display the IPv6 active route table. Monitor
Create Create an IPv6 static route. Configure
Remove Delete the selected IPv6 static routes. Configure
IPv6
Manage
ment
IPv6 Service Enable or disable IPv6 packet forwarding. Configure
DHCP
DHCP Server
Display the DHCP service status, the DHCP
address pool information, the DHCP server
status on an interface, and the information
of an address assigned from a DHCP
address pool.
Monitor
Set the DHCP service status, add, modify,
or delete a DHCP address pool, and
modify the DHCP server status on an
interface.
Configure
DHCP Relay
Display information about the DHCP status,
advanced configuration information of the
DHCP relay agent, DHCP server group
configuration, DHCP relay agent interface
configuration, and the DHCP client
information.
Monitor
Enable/disable DHCP, configure
advanced DHCP relay agent settings,
configure a DHCP server group, and
enable/disable the DHCP relay agent on
an interface.
Configure
DHCP Snooping
Display the status, trusted and untrusted
ports and DHCP client information of DHCP
snooping.
Monitor
Enable/disable DHCP snooping, and
configure DHCP snooping trusted and
untrusted ports.
Configure
Service Service
Display the states of services: enabled or
disabled.
Configure
Enable/disable services, and set related
parameters.
Management
Diagnosti
c Tools
Ping
Ping an IP address and display the
operation result.
Visitor
Trace Route
Perform trace route operation and display
the operation result.
Visitor
Authenticat
ion
MAC
Authentic
ation
MAC
Authentication
Display MAC authentication configuration
information.
Monitor
Configure MAC authentication. Configure
802.1X 802.1X
Display 802.1X configuration information
globally or on a port.
Monitor
Configure 802.1X globally or on a port. Configure

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English