HP 830 Series User Manual

280
Figure 265 Configuring attributes for pool1
4. Configure the dynamic DHCP address pool named pool2:
a. Click Add to perform the following configurations, as shown in Figure 266.
b. Enter pool2
for IP Pool Name.
c. Enter 10.1.1.128 for IP Address.
d. Enter 255.255.255.128 for Mask.
e. Enter 5 days 0 hours 0 minutes 0 seconds for Lease Duration.
f. Enter 10.1.1.254 for Gateway Address.
g. Click Apply

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English