23
1. On the system parameter configuration page, click Next.
Figure 17 Management IP address configuration page
2. Configure the parameters as described in Table 5.
Table 5 Configuration items
Item Descri
Select VLAN Interface
Select a VLAN interface.
Available VLAN interfaces are those configured in the page that you enter by selecting
Network > VLAN Interface and selecting the Create tab.
The IP address of a VLAN interface can be used as the management IP address to
access the device. Configure a VLAN interface and its IP address in the page that you
enter by selecting Network > VLAN Interface. For more information, see "Configuring
VLAN interfaces."
Admin status
Shut down or bring up the VLAN interface.
When errors occurred to the VLAN interface, you can shut down the interface and then
bring it up.
By default, the VLAN interface is down if no Ethernet ports in the VLAN is up. The
VLAN is in the up state if one or more ports in the VLAN are up.
IMPORTANT:
Shutting down or bringing up the VLAN interface does not affect the status of the Ethernet
ports in the VLAN.
To Next Page
Loading...
Need help?
General