HP 830 Series User Manual

413
Configuring a RADIUS scheme
1. Select Authentication > RADIUS from the navigation tree.
The RADIUS Server tab appears.
2. Select Authentication Server from the Server Type list, enter 10.110.91.146 in the Primary Server
IP box and 1812 in the Primary Server UDP Port box, and select active from the Primary Server
Status list.
3. Click Apply.
Figure 424 Configuring the RADIUS authentication server
4. On the RADIUS Server tab, select Accounting Server from the Server Type list, enter
10.110.91.146 in the Primary Server IP box and 1813 in the Primary Server UDP Port box, and
select active from the Primary Server Status list.
5. Click Apply.
Figure 425 Configuring the RADIUS accounting server
6. Click the RADIUS Setup tab.
7. Select standard from the Server Type list, select the Authentication Server Shared Key and
Accounting Server Shared Key options, enter abc in the four shared key boxes, and select
without-domain from the Username Format list.
8. Click Apply.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English