HP 830 Series - Page 461

449
b. Select 2001 from the ACL list, select Permit from the Action list, select the Source IP Address
box and enter 10.1.1.3, and then enter 0.0.0.0 in the Source Wildcard field.
c. Click Add.
Figure 466 Configuring an ACL rule to permit Host B
3. Configure authorized IP:
a. Select Security > Authorized IP from the navigation tree.
b. Click the Setup tab.
The authorized IP configuration page appears.
c. Select 2001 for IPv4 ACL in the Telnet field, and select 2001 for IPv4 ACL in the Web (HTTP)
field.
d. Click Apply.