HP 830 Series User Manual

492
Figure 495 Configuring rate limit on a port
3. Configure rate limit on a port as described in Table 158.
4. Click Apply.
Table 158 Configuration items
Item Descri
p
tion
Please select an interface type Select the types of interfaces to be configured with rate limit.
Rate Limit Enable or disable rate limit on the specified port.
Direction
Select a direction to which the rate limit is to be applied.
• Inbound—Limits the rate of packets received on the specified port.
• Outbound—Limits the rate of packets sent by the specified port.
• Both—Limits the rate of packets received on the specified port and packets
sent by the specified port.
CIR Set the committed information rate (CIR), which is the average traffic rate.
CBS
Set the committed burst size (CBS), which is the number of bits that can be sent
in each interval.
EBS
Set the excess burst size (EBS).
EBS is available when the CBS box is selected.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English