Under Status and Drive (n) are the following items:
v Status - the current status of the drive
v Activity - the current action completed by the drive
v Source - the serial number of the cartridge in the drive
v Encryption - indicates the type of data encryption set for the selected drive (does not appear on Gen3
or SCSI drives)
v Topology - the topology chosen for a fibre library (see “Fibre Channel interface” on page 36)
v Speed - indicates the speed of the fibre channel (fibre library)
v Link - indicates the status of the fibre channel (fibre library)
v Hashed Address - an address calculated from the WWID
Under Identity and Drive (n) are the following items:
v Firmware Rev - the version level of drive firmware
v Vendor ID - IBM
v Product ID - drive inquiry string
v Serial Number - the drive serial number
v Version - Ultrium 3 and 4 half height SAS drives and Ultrium 4 Fibre Channel drives might be listed as
Version 2.
v SCSI ID - the unique identifier assigned to a SCSI drive
v WWNN - the fibre channel drive's Worldwide Node Name
v Topology - the topology chosen for the fibre channel drive
v Speed - indicates the speed of the fibre channel tape drive
v Loop ID - unique identifier assigned to a fibre channel tape drive
v PID - port identification (SAS only)
Monitor: Inventory
This menu item displays the current library inventory of a 4U library.
94 IBM TS3100 Tape Library and TS3200 Tape Library: Setup, Operator, and Service Guide Machine Type 3573
To Next Page
Loading...
Need help?
General
