4. Carefully return the library to an upright position.
What to do next
Important: Do not place any objects on top of the library.
Removing and storing the shipping lock
About this task
Important: The shipping lock, which prevents the library accessor from moving during shipment, must
be removed before the library is powered ON.
The shipping lock is held in place with a label and is in the top center of the library. After the shipping
lock is removed, it must be stored on the right side of the back panel of the library for future use.
To remove and store the shipping lock:
Figure 19. Installing foot pads on the bottom of the library enclosure
Installation and configuration 43
To Next Page
Loading...
Need help?
General
