Table 29. Drive Identity page elements (continued)
Menu Item Description 2U Library 4U Library
SCSI Fibre SAS SCSI Fibre SAS
Data
Compression
If the drive is compressing data, this element displays
"Yes." If not, this element displays "No."
X X X X X X
Interface
Type
Identifies the drive host interface. X X X X X X
Node Name The worldwide node name that is assigned to a Fibre
drive.
X X
Worldwide
ID
The worldwide ID assigned to a SAS drive. (Ports A
and B)
X X
Port A Provides information about Port A. X X
Port Name The name that is assigned to a Fibre Channel port that
is "enabled".
X X
Topology The type of connection to the host. X X
FC-AL Loop
ID
The Fibre Channel - Arbitrated Loop ID of the drive.
Options are LN, L, or N.
X X
Speed The current speed setting of the drive. Choices are Auto
(where the drive automatically negotiates the speed of
the drive to match that of the server), 1 Gb/s, 2 Gb/s, 4
Gb/s, or 8 Gb/s for Fibre Channel; 3 Gb/s or 6 Gb/s
for SAS.
X X
Port B Provides information about Port B. For Fibre Channel
drives, Port B is Disabled.
X X
114 IBM TS3100 Tape Library and TS3200 Tape Library: Setup, Operator, and Service Guide Machine Type 3573
To Next Page
Loading...
Need help?
General
