IBM TS3100 Service Manual

drives have one SAS connector. Unused SAS connectors do not need to be terminated.
3. Attach the other end of the host interface cable.
v For a SCSI library, connect the host interface cable to the connector on the SCSI host bus adapter or
to the connector on the previous device on the SCSI bus. Attach the terminator (
3
in Figure 35) to
the remaining SCSI connector on the back panel of the library, if the library is the last or only
a77ug017
1
3
4
2
Figure 35. Attaching a SCSI host interface cable to the 2U library
a77ug101
1
3
4
2
5
6
Figure 36. Attaching host interface cables to the 4U library.
a77ug134
1
3
2
Figure 37. Attaching a SAS interface cable to the 2U library
54 IBM TS3100 Tape Library and TS3200 Tape Library: Setup, Operator, and Service Guide Machine Type 3573

IBM TS3100 Specifications

General

Brand	IBM
Model	TS3100
Category	Network Hardware
Language	English