Table 57. Replacement parts (continued)
Part Number Description
00VJ142 SAS/Mini-SAS 4x Interposer
46X9904 Mini-SAS/Mini-SAS 4x Interposer
95P6566 SAS Wrap Tool
23R9679 Library Enclosure (2U)*
23R9629 Library Enclosure (4U)*
23R6471 Left Cartridge Magazine (2U)
23R6452 Right Cartridge Magazine (2U/4U)
23R7175 Lower Left Cartridge Magazine (4U)
23R7174 Upper Left Cartridge Magazine (4U)
23R7172 Block Out Panel, Power Supply (4U)
23R7173 Block Out Panel, Full Height Drive Bay (4U)
45E2709 Half Height Drive Filler Plate (2U/4U)
* Tier 2 CRUs
Power cords
To avoid electrical shock, a power cord with a grounded attachment plug is provided. Use
only properly grounded outlets.
Table 58 on page 253 lists the power cord part number, feature code, the country, or region
where the power cord is used, and the plug's standard reference. The last column in the
table contains an index number that you can match to a specific receptacle type in
Figure 193 on page 257.
All power cords use an appliance coupler that complies with the International
Electrotechnical Commission (IEC) Standard 320, Sheet C13.
If the power cord that you receive does not match your receptacle, contact your local dealer.
Power cords that are used in the United States and Canada are listed by Underwriter's
Laboratories (UL), are certified by the Canadian Standards Association (CSA), and comply
with the plug standards of the National Electrical Manufacturers Association (NEMA). For
other worldwide geographies, plug standards are listed in Table 58 on page 253.
252 IBM TS3100 Tape Library and TS3200 Tape Library: Setup, Operator, and Service Guide Machine Type 3573