ICON A5 - Page 404

12-6 HORIZONTAL TAIL / HORIZONTAL TAIL GENERAL MAINTENANCE
ICON A5 / MAINTENANCE MANUAL CHANGE C1
CHAPTER 12
12.3 Horizontal Tail General Maintenance
12.3.1 Horizontal Tail Removal and Installation
Use the following procedures to remove and install the horizontal tail.
12.3.1.1 Remove Horizontal Tail Tip Lock Switches
Use the following procedure to remove the two horizontal tail tip lock switches.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
09—Horizontal Tail
Consumables
None
TASK INSTRUCTIONS:
1. Remove horizontal tail tip access panel. Keep screws for reinstallation. (See Figure 12-2.)