ICON A5 - Page 526

14-18 LANDING GEAR / LANDING GEAR GENERAL MAINTENANCE
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 14
14.4 Landing Gear General Maintenance
14.4.1 Wheel and Brake System Maintenance
Maintenance of the wheel brake systems.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
See Beringer Maintenance Manual.
Parts Required
See Beringer Maintenance Manual.
Aircraft System and Number
11—Landing Gear
Consumables
See Beringer Maintenance Manual.
TASK INSTRUCTIONS:
1. All regular maintenance tasks on the braking system shall be done in accordance with the proce-
dures in the Beringer Wheel and Brakes Maintenance Manual. This document includes informa-
tion and tasks for mounting, maintenance, assembly instructions, bleeding procedures, and
changing tires.
2. Only use brake fluid that meets MIL-PRF-83282, such as Royco 782.
CAUTION:
VERIFICATION METHOD:
Review task from Beringer Wheel and Brakes Maintenance Manual and verify all steps completed.
Visually inspect the system for any anomalies. Test the braking system thoroughly during taxi before
attempting flight.