ICON A5 - Page 554

14-46 LANDING GEAR / MAIN LANDING GEAR
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 14
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
11—Landing Gear
Consumables
None
NOTE: During the following procedures, do not actuate the brake system.
TASK INSTRUCTIONS:
1. Raise the aircraft on jacks. (See “Empty Weight and CG Measurement While on Jackpoint
Scales” on page 3-32.)
2. Remove the safety wire that secures the brake rotor to the MLG wheel.