LANDING GEAR / MAIN LANDING GEAR 14-55
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
3. Move the digital protractor to the Bellcrank surface and read measurement.
4. The measurement on the protractor shall read 3.822±.237°.
5. To adjust the position of the actuator, loosen the jam nut on the actuator switch.
6. To adjust the landing gear DOWN position, adjust the limit switch closest to the rod end accord-
ingly.
7. Torque jam nut to 36-40 in-lbs.
VERIFICATION METHOD:
The protractor’s measurement should read 3.822±.237°.
To Next Page
Loading...
