14-98 LANDING GEAR / AFT NOSE LANDING GEAR DOOR
ICON A5 / MAINTENANCE MANUAL CHANGE C2
18. Fit the doors to the aircraft per the conditions in the nose landing gear inspection procedure.
(See “Nose Gear Inspection” on page 14-56.) Make adjustments as necessary using the following
adjustment options:
• Adjust the position of the door in the bellcrank slot.
• Add shims between the bellcranks and the doors with a maximum of four shims installed
per bellcrank.
Qty Item No Part No
A/N (201) ICA010389
To Next Page
Loading...
