ICON A5 - Page 737

WING / TROUBLESHOOTING 17-5
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
CHAPTER 17
TASK INSTRUCTIONS:
1. Conduct a tap test on right hand wing skins in the vicinity of upper and lower bond lines for the
main spar. (See “Manual Tap Test” on page 3-55.)
2. Conduct a tap test on right hand wing skins in the vicinity of upper and lower bond lines for the
aft spar.
3. Conduct a tap test on right hand wing skins in the vicinity of upper and lower lines for all internal
ribs.
4. Conduct a tap test on left hand wing skins in the vicinity of upper and lower bond lines for the
main spar.
5. Conduct a tap test on left hand wing skins in the vicinity of upper and lower bond lines for the aft
spar.
6. Conduct a tap test on left hand wing skins in the vicinity of upper and lower bond lines for all
internal ribs.
VERIFICATION METHOD:
Confirm results are within acceptable limits.
RELATED INFORMATION:
"Manual Tap Test" on page 3-55
17.2.3 Exterior/Interior Wing Control Surfaces
The following can be used for the general inspection of the exterior and interior wing control systems.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
14—Wing
Consumables