WING / WING GENERAL MAINTENANCE 17-17
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
14—Wing
Consumables
None
NOTE: Throughout this procedure, apply the methods of the general VHB
tape procedure (See Related Information).
1. Remove the fence and adhesive tape residue from the trailing edge light.
2. Trim 70006436714 black VHB tape to the appropriate flat pattern. The LH patterns are shown,
use mirror image for RH patterns.
3. Apply VHB tape in the channel of the fence so that tape lies entirely inside of channel.
4. Install the fence.
To Next Page
Loading...
