iPECS eMG80 - Normal Line Ring Assignment

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
90
2.26.2 Normal Line Ring Assignment
Description
An incoming outside call on a “Normal” outside Line can ring to the integrated Auto Attendant
either immediately upon detection or after a delay of up to 30 seconds. This allows other stations
assigned immediate ring the opportunity to answer before the call is routed to the Auto Attendant.
Once routed to the Auto Attendant the pre-recorded system announcement plays and the routing
associated with the announcement will apply.
Note a “Normal” outside Line is a standard non-DID/DISA line that employs “Ring Assignment” to
route the call.
Operation
System
Conditions
Operation of this feature is automatic when assigned.
1. When Delayed Auto Attendant Ring is assigned, after the delay, the call will no longer
ring the assigned stations and will only ring to the Auto Attendant.
2. If no delay is entered, the call will ring to the Auto Attendant immediately.
3. To assign Delayed Auto Attendant ring, at least one Station or Station Group must be
assigned immediate ring.
4. Ring is assigned to station and AA ring time is assigned. The call is delivered to the
station first after the AA ring time. The station ring is stopped and call is delivered to
VSF announcement.
Programming
Keyset Admin.
CO/IP
CO Ring Assignment (PGM 144)
CO LINE DATA
Web Admin.
CO/IP Ring Assignment
Related Features
 Line Ring Assignment
Hardware