iPECS eMG80 - Intercom Signaling Mode

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
364
5.5 Call Log Display
Description
Using an iPECS Phone with 3-Soft buttons, you can view a log of incoming, outgoing and missed
calls on the display. A Flex button must be assigned as a {CALL LOG} button, which allows easy
access to the Call Log menu.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “57” + [HOLD/SAVE]
To assign a {CALL LOG} button
1. Press the {CALL LOG} button.
To access the Call Log menu
1. RECEIVED CALL
2. DIALED CALL
OK
2. Using the volume Up/Down keys, select the desired log (received, dialed, or lost).
123467890
24/07 14:51
BACK DELETE OK
Conditions
1. The number of records in the Call Log is limited by the Call Log attribute in the System
Data.
Programming
SYSTEM DATA
Web Admin.
System AttributesCall Log Number, ICM Call Log, Number
of CLI Wait List
Related Features
Hardware
 iPECS IP and LDP Phones with LCD