iPECS eMG80 - Net Call Forward

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
263
Programming
Keyset Admin.
SYSTEM Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
NETWORKING DATA
Web Admin.
Net Basic Attributes
Net CO Line Attributes
Net Numbering Plan
Related Features
 Station Message Wait/Call Back
 Do Not Disturb (DND)
Hardware
2.82.2.8 Net Call Forward
Description
A user can forward (send) their calls to another station, Station Group or a user’s VMIB mailbox
across the private network. The user may forward all calls immediately, if the user does not
answer the call or if the station is busy. In addition, the user may select to activate ‘Follow-me’
forward, forwarding calls from a location other than the station. Calls forward in the same manner
as a Call Forward within a system and is transparent to the user.
From a network perspective, the iPECS system can use either the ‘Join’ or ‘Re-route’ signaling
method to complete a call forward over the network. The Networking Transfer Mode assigns the
method that will be used and should be selected to match other systems connected in the private
network.
 Join - an additional connecting path is needed to transfer the call to another station.
 Routing - a new connecting path is used to forward the call.
You select the type and condition under which calls will forward by entering a Call Forward code
as follows:
Code 0
Remote Call Forward, forwards all calls to the station, except recalls, activated
from a remote station, Call Forward, Follow-me.
Code 1
Unconditional, all calls to the station, except recalls, forward internally or externally
immediately upon receipt.
Code 2
Busy, if the station is busy, forwards all calls, except recalls, to the selected station.
Code 3
No Answer, forwards all calls, except recalls, to the selected station when t
he
station does not answer within the No Answer timer.
Code 4
Busy/No Answer, forwards calls if the selected station is busy or does not answer
within the No Answer timer.