iPECS eMG80 - Call Duration Warning Tone

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
42
2.7.12.4 Group Parameter Control
Description
An ACD Group Supervisor can adjust several of the ACD Group routing parameters in real-time.
A {ACD Supervisor Status} button is required. Adjustable parameters are:
 Overflow Destination
 Overflow Time
 Wrap-up Time
 ACD Voice Mailbox Password
Operation
Supervisor iPECS IP & LDP Phone
[TRANS/PGM] + {FLEX} + “*576” + “Group Number” + [HOLD/SAVE]
To assign a {ACD Supervisor Status} button at the Supervisor
1. Lift the handset or press the [SPEAKER] button.
To use the Supervisor Status Menu
2. Press the {ACD Supervisor Status} button.
[1] ACD STATUS
[2] ACD DATABASE
[3] ACD DUTY
[#] ACD PRINT
3. Dial ACD Dbase Code “2”.
4. Select database item, scrolling with the [VOL UP]/[VOL DOWN] button;
Overflow Destination- station (Net station) (1)/group (2)/system speed dial (3)
Overflow Time- xxx seconds
Wrap-Up Time- xxx seconds
Password- up to 12 digits
5. Enter new data.
6. Press the [HOLD/SAVE] button.
Conditions
1. The Supervisor must be assigned as a Supervisor for the ACD Group and be logged
into the group to access the Group Status display information.
Programming
Keyset Admin.
NUMBERING PLAN
ACD Supervisor Status code (PGM 107-Button 7)