iPECS eMG80 - SLT Name Entry

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
437
7.5 SLT Name Entry
Description
A SLT user has the capability to program a name so that a calling user with an LCD can see the
name instead of the station number.
Operation
SLT
1. Lift the handset.
To register the name at the SLT
2. Dial “*561”, the SLT Programming code, confirmation tone is heard.
3. Dial “74”, the SLT Name Program Code.
4. Enter name, refer to Station Speed Dial, Alphanumeric Chart.
5. Momentarily depress the hook-switch, receive confirmation tone.
1. Lift the handset.
To delete the name at the SLT
2. Dial “*561”, the SLT Programming code, confirmation tone is heard.
3. Dial “74”, the SLT Name Program Code.
4. Momentarily depress the hook-switch, receive confirmation tone.
Conditions
Programming
STATION DATA
Web Admin.
Station Name Display
Related Features
 Dial-by-Name
 Station Speed Dial
Hardware