iPECS eMG80 - Push to Talk Paging

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
321
3.12 Push to Talk Paging
Description
Each iPECS IP, LDP and WLAN Phone can be assigned as a member of one or more of the
system’s nine Push-To-Talk (PTT) page groups. As such a user, you may login or log-out of any
one or all of the PTT groups to which your station is assigned. Once logged in, you may place or
receive one-way page announcements to/from other users who are logged in to the same PTT
group. To place a PTT page announcement, the user must press and hold the {PTT} Flex button.
An Attendant may log other stations in and out of PTT groups.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “99” + [HOLD/SAVE]
To assign a {PTT} Flex button
1. Dial “#0”, the PTT Log-in/out code.
To log-in to a PTT group
2. Dial the desired PTT group number (“1”~“9” and “0” for all groups).
1. Dial “#0”, the PTT Log-in/out code.
To log-out of the PTT group(s)
2. Dial “*”.
1. Press and hold the {PTT} Flex button.
To place a page to the active PTT group
2. After confirmation tone, make your page announcement.
Attendant
1. Press the [TRANS/PGM] button.
To log other stations in to a PTT group
2. Dial “077”, the Attendant PTT log-in/out code.
3. Dial the desired station range, for a single station dial the station number and ‘*’.
4. Dial the PTT group number (“1”~“9” and “0” for all groups).
5. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To log other stations out of a PTT group
2. Dial “077”, the Attendant PTT log-in/out code.
3. Dial the desired station range, for a single station dial the station number and ‘*’.
4. Dial “*”.