iPECS eMG80 - Speakerphone

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
376
5.11 Group Listening
Description
The iPECS IP and LDP Phones have a built-in speaker. If allowed, you may employ the speaker
to monitor a call while using the handset to converse with the outside party. This enables a group
of people in the room to listen to both parties in the conversation.
Operation
iPECS IP & LDP Phones
1. Press the [SPEAKER] button, speaker activates, the speakerphone microphone will be
muted while the handset is off-hook.
While on a call using the handset
Conditions
1. While using the speakerphone, lifting the handset will turn off the speakerphone. To
activate Group Listening, the [SPEAKER] button must be pressed while the handset is
off-hook.
2. With Group Listen active, pressing the [MUTE] button will mute the handset
microphone. The connected party is still heard over both the handset receiver and the
speaker.
3. If full speakerphone operation is desired and permitted with Group Listen active, simply
place the handset on-hook.
Programming
Keyset Admin.
STATION
Group Listening (PGM 113-Button 3)
STATION DATA
Web Admin.
Common Attributes

Group Listening
Related Features
 Speakerphone
 Mute
Hardware
 iPECS IP or LDP Phone