iPECS eMG80 - Call Log Display

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
351
4.16 Line Monitor
Description
When a Line is configured in the system and the system determines that the service provider
connection is lost, the Line is placed in an Out-of-Service condition. In this state, the Line cannot
be employed for an outgoing call but incoming calls operate normally.
Operation
Conditions
Operation of this feature is either automatic (when programmed) or by Web Admin.
1. LIK-LGCM can’t support it. Only UCP-LGCM support it.
Programming
Keyset Admin.
CO/IP
Line Monitoring (PGM148-Button 12)
CO LINE DATA
Web Admin.
Analog Attributes

Analogue Line Monitor
Related Features
Hardware