iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
442
8.2 SIP Phone Provisioning, Ericsson-LG Enterprise Phones
Description
The Provisioning feature automatically configures the Ericsson-LG Enterprise SIP phones from
the eMG database Provisioning Tables. When the SIP phone powers up, it will download the
configuration file from the system and apply the configuration to the phone. A table may include
the MAC address of a specific phone, in which case the table is only available to the SIP phone
with the assigned MAC. When no MAC address is assigned, the table is employed by all SIP
phones of the type (model) entered as the “Conf Type”.
If the Provisioning Tables are not used, the system must be configured with the SIP Phone
attributes as with any SIP phone and the SIP phone must also be configured separately to match.
Characteristics that can be configured from the Provisioning Tables include:
Registration Timer
SIP Phone’s local port
Proxy Port
Transport type
Codec priority
Network Time Server and DST
Default Volume levels
Digit Map.
For more information on these parameters refer to the SIP phone Installer Guide available from
your local Ericsson-LG Enterprise representative.
In addition, Feature Sync can be enabled so that when the SIP phone activates DND or Call
Forward, the information is sent to the system and the system will activate the appropriate feature.
This also permits the SIP phone to activate One-time Call Forward and One-time DND while
receiving ring.
Operation
System
Conditions
Operation of SIP phone provisioning is automatic when configured.
1. Provisioning is only available for Ericsson-LG Enterprise SIP desktop phone.
2. The download employs TFTP as the file transfer protocol.
Programming
SIP DATA
Web Admin.
SIP Common Attributes
To Next Page
Loading...
